M200: Duplex Fuel Transfer Pumps - High Flow
The M200 High Flow Duplex Pump transfers fuel to multiple generators and Boilers for Data Center and Hospital Applications. The pumps are Positive Displacement Viking Pumps in a traditional side x side mount with a containment basin.
Data Sheet:
esds-m200-duplex-fuel-pump-data
Dimensional Drawing:
esdw-m200-duplex-fuel-pump-drawing
Instruction Manual:
General:
- Capacity: 5 - 150 GPM (140-600 LPM)
- Motor: TEFC or X-Proof
- Power: 230 - 460 VAC 3- Phase, 50-60 HZ.
- Enclosure: Weatherproof NEMA 5, (IP 65) Powder Coat Steel (RAL 7035) or Stainless Steel Optional
Accessories:
- Ball Valves, Inlet and Outlet
- Inlet Y-Strainer
- Outlet Check Valve
- Inlet Compound Gauge -30 to + 130
- Outlet Pressure Gauge 0-100 PSI
- Containment Basin
- Leak Sensor
- Flow Sensor
High Reliability:
The M200 High Flow Duplex Pump transfers fuel to multiple generators and Boilers for Data Center and Hospital Applications. The pumps are Positive Displacement Viking Pumps in a traditional side x side mount with a containment basin.
Integration Ready:
The units are designed for direct integration to BMS / SCADA systems. The mechanical design is based on Viking positive displacement pumps and is complete with strainers, check valves, ball, valves, pressure / vacuum gauges, relief valves. The unit is mounted on an integral containment with leak detection monitoring.
Controls Onboard:
The Duplex Pump Set includes a motor starter panel with disconnect switch. The motor starter / drive includes current sensors for performance feedback to the duplex pump controller. The C82 Controller provides duplex pump operation and monitoring with HOA switches and an emergency stop.