C6-ATS Multi-Pump Motor Control with Dual Power and Auto-Switch
Fuel Pump Motor Controls for Critical Service
The C6 ATS(PDU) creates a dual power source input with automatic transfer to the alternate power source upon failure of the primary. The Power Distribution Functions are monitored smart circuit breakers to provide reliable power to the fuel system control panels, tank monitors, leak detection, day tanks, and other critical gear. The on-board PLC collects power status information and the state of all circuit breakers. Ethernet connectivity allows the system to be monitored by the Master Fuel System Controller and BMS.
Get the Data Sheet
Master Control:
The C9 Control Module is a highly flexible controller for Generator Fuel Systems. The Controller can be programmed to function as (a) Fuel Tank Fill Control, (b) Duplex Pump Operation, ( c) Filter Polisher Control, (d) Day Tank Level Control, ( e) Multi-Tank Valve Control. .
Integration Ready:
The units are designed for direct integration into generator control and monitoring systems for CAT, Cummins, MTU, Kohler and other generator suppliers. Communication options are Modbus Serial or Ethernet, and BACnet Serial or Ethernet.
General:
- Approvals: UL / CE
- Power: 120-230 VAC, 1 Phase, 50-60 HZ
- Dimensions: 12x12x6 IN (300x300x150)
- Enclosure: Weatherproof NEMA 4, (IP 65) Powder Coat Steel (RAL 7035)
- Control: Allen Bradley Micro 820
- Communication: Modbus Serial, CIP Ethernet
Accessories:
- HOA Switch for Control Functions
- Power (Green) and Alarm (Red) Lights
- Output Relays for General Alarm
- Optional Horn
- Optional Stainless Enclosure
- Optional Heater
- Optional BACnet