MX200
Macro100–600 GPM (400–2400 LPM)
The MX200 Duplex Fuel Pump is used at storage tank farms for large data centers, hospitals, or other central plants to transfer high flows of desel fuel to point of use. The MX200 is available with a pre-engineered pump house enclosure with full motor control and tank farm flow control capability.
MOTOR
TEFC, 0.5-1.5 HP (0.33-1.1 KW)
POWER
230-460 VAC, 3 Phase
ENCLOSURE
Weatherproof NEMA 5, (IP 65) Powder Coat Steel (RAL 7035) or Stainless Steel Optional
ACCESSORIES
Ball Valves, Inlet and Outlet
Inlet Y-Strainer
Outlet Check Valve
Inlet Compound Gauge -30 to + 130
Outlet Pressure Gauge 0-100 PSI
Containment Basin
Leak Sensor
Flow Sensor
APPLICATIONS
High Reliability: The MX200 Duplex Fuel Pump is used at storage tank farms for large data centers, hospitals, or other central plants to transfer high flows of desel fuel to point of use. The MX200 is available with a pre-engineered pump house enclosure with full motor control and tank farm flow control capability.
Integration Ready: The units are designed for direct integration to BMS / SCADA systems. The mechanical design is based on Viking positive displacement pumps and is complete with strainers, check valves, ball, valves, pressure / vacuum gauges, relief valves. The unit is mounted on an integral containment with leak detection monitoring.
Controls OnBoard: The Duplex Pump Set includes a motor starter panel with disconnect switch. The motor starter / drive includes current sensors for performance feedback to the duplex pump controller. The C82 Controller provides duplex pump operation and monitoring with HOA switches and an emergency stop.