M30
5–30 GPM (20–120 LPM)
The M30 Fuel Filter Polisher is designed for 1-4 fuel storage tanks. The higher flow rate allows for polishing up to 40,000 gallons per day in a single or multiple storage tanks. The C81 Controller has input-output capability for actuated control valves to allow for fuel flow from multiple tanks. The system removes water and particulate to 1 micron level to maintain the ISO 18/16/13 quality standard..
MOTOR
TEFC, 0.5 to 1.5 HP (0.33 - 1.1 KW)
POWER
120-230 VAC, 1 Phase, 50-60 HZ
ENCLOSURE
Weatherproof NEMA 4, (IP 65) Powder Coat Steel (RAL 7035) or Stainless Steel Optional
FILTER
Water and Particulate to 1 Micron
ACCESSORIES
Ball Valves, Inlet and Outlet
Inlet Y-Strainer
Outlet Check Valve
Inlet Compound Gauge -30 to + 130
Outlet Pressure Gauge 0-100 PSI
Containment Basin
Flow, Leak, Filter DP, Filter Water Sensors
Optional: Water Tank and Controls, Magnetics
Floor Mount Stand 24 IN (600) Height
APPLICATIONS
High Efficiency Fuel Cleaning: The M3 Filter Polisher is designed for high efficiency fuel cleaning. Positive displacement pumps flow fuel through a multi-phase particulate and water coalescing filter to clean fuel to ISO 18/16/13 Standard or better
Comprehensive Control and Monitoring: The system controller allows for scheduling of filtration cycles to meet the facilities operating needs. Filter differential pressure, filter water, pump flow, and leak detection sensors are integrated with the controller. The system integrates with BMS and SCADA systems using BACnet or Modbus communication.
Adaptable to User Requirements: The M3 Filter Polisher can be equipped with special equipment to meet user requirements for water holding tanks, magnetics, and final filtration.