01
Coalescing filtration to 1 micron
Positive-displacement pumps push fuel through a multi-phase particulate and water-coalescing filter, cleaning to ISO 18/16/13 or better.
Choose your flow class
Sized to the tank in front of you.
Select a model to see where it fits in the family. Every class shares the same filtration, controls, and enclosure — only the flow rate changes.
M3
3–15 GPM (12–60 LPM)
The M3 Fuel Filter Polisher is a compact system designed for use with single generator sub-base tanks. The design allows for installation in a minimum footprint within the generator enclosure. The M3 has all of the performance of larger filter polishers with water and particulate removal up to 1 micron. Maintains fuel to ISO 18/16/13 quality standard.
Motor
TEFC, 0.5 to 1.0 HP (0.33 - 0.75 KW)
Power
120-230 VAC, 1 Phase, 50-60 HZ
M30
5–30 GPM (20–120 LPM)
The M30 Fuel Filter Polisher is designed for 1-4 fuel storage tanks. The higher flow rate allows for polishing up to 40,000 gallons per day in a single or multiple storage tanks. The C81 Controller has input-output capability for actuated control valves to allow for fuel flow from multiple tanks. The system removes water and particulate to 1 micron level to maintain the ISO 18/16/13 quality standard..
Motor
TEFC, 0.5 to 1.5 HP (0.33 - 1.1 KW)
Power
120-230 VAC, 1 Phase, 50-60 HZ
M300
25–150 GPM (100–600 LPM)
The M300 Fuel Filter Polisher is designed for single or multiple 30,000 to 50,000 gallon tanks, above ground or underground at Data Centers and Hospitals. The C81 Controller has input-output capability for actuated control valves to allow for fuel flow from multiple tanks. The system removes water and particulate to 1 micron level to maintain the ISO 18/16/13 quality standard.
Motor
TEFC, 1.0 to 3.0 HP (0.75 - 2.25 KW)
Power
120-230 VAC, 1 Phase, 50-60 HZ, Optional 3-Phase
MX300
30–120 GPM (120–500 LPM)
The MX300 Fuel Filter Polisher is designed for small tank farms at large data centers or hospitals, where a walk-in enclosure system is preferred. The climate controlled enclosure allows for the mounting and protection of other fuel related monitor and control panels.
Motor
TEFC, 1.0 to 3.0 HP (0.75 - 2.25 KW)
Power
120-230 VAC, 1 Phase, 50-60 HZ, Optional 3-Phase
Flow range
Family span · 0–300 GPM
0
75
150
225
300 GPM
Shared technology
The same engineering in every class.
02
C81 controller, BMS & SCADA
Schedule filtration cycles to the facility's needs. Integrates with building systems over BACnet or Modbus, with I/O for actuated multi-tank valves.
03
Integrated sensing
Filter differential pressure, filter-water, pump-flow, and leak-detection sensors are wired to the controller out of the box.
01
NEMA 4 / IP65 enclosure
Weatherproof powder-coat steel (RAL 7035), with stainless steel optional, for indoor enclosures or outdoor tank-side installs.
Model comparison
The whole family, side by side.
Model
Flow
Motor
Power
M3
3–15 GPM (12–60 LPM)
TEFC, 0.5 to 1.0 HP (0.33 - 0.75 KW)
120-230 VAC, 1 Phase, 50-60 HZ
M30
5–30 GPM (20–120 LPM)
TEFC, 0.5 to 1.5 HP (0.33 - 1.1 KW)
120-230 VAC, 1 Phase, 50-60 HZ
M300
25–150 GPM (100–600 LPM)
TEFC, 1.0 to 3.0 HP (0.75 - 2.25 KW)
120-230 VAC, 1 Phase, 50-60 HZ, Optional 3-Phase
MX300
30–120 GPM (120–500 LPM)
TEFC, 1.0 to 3.0 HP (0.75 - 2.25 KW)
120-230 VAC, 1 Phase, 50-60 HZ, Optional 3-Phase
All models filter water + particulate to 1 micron · ISO 18/16/13 · NEMA 4 (IP65) · C81 controller, BACnet / Modbus
How it works
A closed loop that never stops conditioning fuel.
Intake
Fuel is drawn continuously from the storage tank, low and slow, to capture settled water and sediment.
Filtration & separation
Multi-phase coalescing and particulate stages strip free water and contaminants to ISO 18/16/13.
Monitoring
Onboard sensors track flow, filter DP, water, and leaks, logging each cycle to the C81 controller.
Return to tank
Conditioned fuel returns to the tank, keeping the entire volume generator-ready around the clock.
Equipment & options
Configured for your install.
Every M3 Series unit ships with a complete valve, gauge, and sensor package, and adapts to the water-handling and final-filtration requirements of the site.
Standard equipment
Positive-displacement transfer pump
Ball valves, inlet & outlet
Inlet Y-strainer
Outlet check valve
Inlet compound gauge (-30 to +130)
Outlet pressure gauge (0–100 PSI)
Flow, leak, filter DP & water sensors
Options
Stainless steel enclosure
Water holding tank & controls
Magnetic conditioning
Final filtration stage
Containment basin
Floor-mount stand, 24 in (600 mm)