01
Viking positive-displacement pumps
Proven PD pumps with excellent suction characteristics for reliable priming and steady transfer — the same core across simplex and duplex sets.
Choose your flow class
Sized to the tank in front of you.
Select a model to see where it fits in the family. Every class shares the same filtration, controls, and enclosure — only the flow rate changes.
M1
Low3–25 GPM (12–100 LPM)
The M1 Simplex Pump Set is used to Transfer Fuel to and from Emergency Power Generators. The pump may be located at a day tank or sub-base tank to suction fuel from a remote storage tank for local tank refill. The M1 is also used at sub-base tanks as a return flow pump for overfill protection.
Motor
TEFC, 0.5 to 1.0 HP (0.33 - 0.75 KW)
Power
120-230 VAC, 1 Phase, 50-60 HZ
M2
Low3–10 GPM (12–40 LPM)
Low Flow: 3, 5, 10 GPM (12, 20, 40 LPM) Compact open frame or with weatherproof enclosure. Positive displacement pump has excellent suction characteristics. Controller includes motor starter, overload relay, disconnect switch, lights for power, active, and alarm. Includes manual valve, check valve, strainer, inlet-outlet gauges, pressure relief valve, leak sensor, flow sensor. Controls will integrate 1-4 point level sensors for control logic.
Motor
TEFC, 0.5 HP (0.33 KW)
Power
120-230 VAC, 1 Phase, 50-60 HZ
M20
Standard5–30 GPM (20–120 LPM)
Standard Flow 5-30 GPM (20-120 LPM) The M20 Duplex Pump Set is designed for reliable fuel transfer in emergency power systems at critical facilities. Its innovative compact design has a minimal footprint while delivering 5 to 30 GPM (20 to 120 LPM) of fuel to serve emergency generators and boilers. The units are designed for direct integration into generator.
Motor
TEFC, 0.5-1.5 HP (0.33-1.1 KW)
Power
120-230 VAC, 1 Phase, 50-60 HZ or Optional 230-460 VAC, 3 Phase
M200
High5–150 GPM (140–600 LPM)
The M200 High Flow Duplex Pump transfers fuel to multiple generators and Boilers for Data Center and Hospital Applications. The pumps are Positive Displacement Viking Pumps in a traditional side x side mount with a containment basin.
Motor
TEFC or X-Proof
Power
230 - 460 VAC 3- Phase, 50-60 HZ.
MX200
Macro100–600 GPM (400–2400 LPM)
The MX200 Duplex Fuel Pump is used at storage tank farms for large data centers, hospitals, or other central plants to transfer high flows of desel fuel to point of use. The MX200 is available with a pre-engineered pump house enclosure with full motor control and tank farm flow control capability.
Motor
TEFC, 0.5-1.5 HP (0.33-1.1 KW)
Power
230-460 VAC, 3 Phase
Flow range
Family span · 0–300 GPM
0
75
150
225
300 GPM
Shared technology
The same engineering in every set.
02
C11 / C82 onboard controls
Motor starter panel with disconnect, HOA switches, and emergency stop. Duplex sets add lead/lag operation and integrate 1–4 point level sensors for control logic.
03
Sensing & integral containment
Leak and flow sensors, inlet compound and outlet pressure gauges, all mounted on an integral containment basin with leak-detection monitoring.
01
NEMA 4 / IP65 enclosure
Weatherproof powder-coat steel (RAL 7035), stainless steel optional. Open-frame configurations available for indoor mechanical rooms.
Model comparison
The whole family, side by side.
Model
Flow
Motor
Power
M1
Low
3–25 GPM (12–100 LPM)
TEFC, 0.5 to 1.0 HP (0.33 - 0.75 KW)
120-230 VAC, 1 Phase, 50-60 HZ
M2
Low
3–10 GPM (12–40 LPM)
TEFC, 0.5 HP (0.33 KW)
120-230 VAC, 1 Phase, 50-60 HZ
M20
Standard
5–30 GPM (20–120 LPM)
TEFC, 0.5-1.5 HP (0.33-1.1 KW)
120-230 VAC, 1 Phase, 50-60 HZ or Optional 230-460 VAC, 3 Phase
M200
High
5–150 GPM (140–600 LPM)
TEFC or X-Proof
230 - 460 VAC 3- Phase, 50-60 HZ.
MX200
Macro
100–600 GPM (400–2400 LPM)
TEFC, 0.5-1.5 HP (0.33-1.1 KW)
230-460 VAC, 3 Phase
All models filter water + particulate to 1 micron · ISO 18/16/13 · NEMA 4 (IP65) · C81 controller, BACnet / Modbus
How it works
Fuel where the generators need it, on demand.
Suction
Positive-displacement pumps draw diesel from a remote or bulk storage tank with strong, reliable suction.
Transfer & overfill return
Fuel moves to day tanks and sub-base tanks for local refill; sub-base sets also return flow for overfill protection.
Duplex redundancy
Duplex sets run lead/lag under the C82 controller, so transfer continues without interruption if one pump is serviced.
Monitor & integrate
Onboard sensors track flow and leaks and feed generator control systems for CAT, Cummins, MTU, Kohler and BMS / SCADA.
Equipment & options
Configured for your install.
Every M-Series set ships with a complete valve, gauge, and sensor package on an integral containment basin, and adapts to open-frame, enclosed, or pump-house installs.
Standard equipment
Viking positive-displacement pump(s)
Ball valves, inlet & outlet
Inlet Y-strainer
Outlet check valve
Pressure relief valve
Inlet compound gauge (-30 to +130)
Outlet pressure gauge (0–100 PSI)
Leak & flow sensors
Integral containment basin
Options
Stainless steel enclosure
Open-frame configuration
Floor-mount stand, 24 in (600 mm)
Pre-engineered pump house (MX200)
1–4 point level sensor integration
Motor starter / VFD drive package