01
Cubic, space-saving design
The cubic form saves space in crowded generator rooms and enclosures while storing 25 to 1000 gallons of lube or waste oil.
Choose your flow class
Sized to the tank in front of you.
Select a model to see where it fits in the family. Every class shares the same filtration, controls, and enclosure — only the flow rate changes.
LM6P
Cubic · HDPE25-1000 GAL (100 - 4000L)
The same cubic lube / waste oil tank in high-density polyethylene — a lightweight, corrosion-proof alternative to steel for generator CHP storage. Space-saving in enclosures and generator rooms, and customizable with the same instrumentation, heaters, and pumps as the steel LM6-S.
Power
120-230 VAC, 1 Phase
Controller
UL 508, PLC Basis with HMI
Best for
Lightweight, corrosion-proof storage
LM6-S
Cubic · Coated Steel25-1000 GAL (100 - 4000L)
A cubic carbon-steel tank with an epoxy / poly exterior coating for safe storage of fresh lube or waste oil in generator CHP applications. The space-saving cubic design fits crowded generator rooms and enclosures, and can be customized with instrumentation, heaters, and pumps in single-wall, double-wall, or double-wall insulated construction.
Power
120-230 VAC, 1 Phase
Controller
UL 508, PLC Basis with HMI
Best for
Durable lube / waste oil storage
Flow range
Family span · 0–300 GPM
0
250
500
750
1000 GAL
Shared technology
The same engineering in both tanks.
02
Built for generator CHP
Designed for safe storage of fresh lube or waste oil in combined heat & power and prime-power generator systems.
03
Two durable materials
Coated carbon steel or lightweight HDPE, in single-wall, double-wall, or double-wall insulated construction.
04
Controls & BMS integration
UL 508 PLC controls with HMI communicate tank status to BAS, generator controls, switchgear, security, and fire-alarm systems.
Built for oil storage
Fresh or waste, safely contained.
Space-saving cubic tanks
The cubic form fits crowded generator rooms and enclosures while storing 25 to 1000 gallons of oil.
Fresh lube or waste oil
Safe storage of fresh lube oil ready for use, or waste oil awaiting removal, for generator CHP applications.
Choose the material
Coated carbon steel or lightweight HDPE, in single-wall, double-wall, or double-wall insulated construction.
Adaptable for special operation
Customize with instrumentation, heaters, and pumps, and integrate status into building and generator systems.
Equipment & options
Configured for your install.
Every LM6 tank ships with a complete vent, gauge, and sensor package for oil, and adapts to the material, wall type, and control requirements of the site.
Standard equipment
4- or 5-point level sensor + leak sensor
Level & temperature transmitters
Standard & emergency vents
Direct-read level gauge
Inspection port & cap
UL 508 PLC controller with HMI
Options
Single / double wall / DW insulated
Coated carbon steel or HDPE construction
Instrumentation, heaters & pumps
High / Low / Leak relay contacts
Modbus / BACnet connectivity