C2-ATS

C2-ATS Fuel Pump Motor Control Dual Power ATS. Earthsafe pump control unit supports dual power feeds with auto-switch on power fail.

C2-ATS

Dual-Power Auto-Switch

A pump motor control with a dual power source input that automatically transfers to the alternate source when the primary fails. The duplex version feeds the active source to both pumps, so redundant pumping continues uninterrupted through a utility outage — with the same protection, disconnect, and feedback as every C2.

POWER
120-230 VAC, 1 Phase, 50-60 HZ
ENCLOSURE
Weatherproof NEMA 4, (IP 65) Powder Coat Steel (RAL 7035) Optional Stainless Steel
CONTROLLER
24 VDC control
TRANSFER
Automatic (ATS)
APPROVALS
UL / CE
ACCESSORIES
HOA Switch for Control Functions Safety Disconnect Switch Rated Pump Contactor with Overload Protection Power / Run (Green) Lights Current Sensors Outputs for Pump Not-Auto and Pump Run
BEST FOR
Uninterrupted pumping through utility outages
Get the C2-ATS data sheet →