A Series · All-in-One Tank Systems

Integrated
fuel, DEF, and engine oil.

Modular Fuel, DEF and Engine Oil storage in 10, 20, and 40-ft ISO container dimensions. Purpose-built, double-wall UL 142 tanks with optional UL 2085 fire ratings integrate pre-plumbed and pre-wired equipment compartments for rapid, set-in-place install.

ALL-IN-ONE CONTAINER / AUTOMATIC OPERATION / PLC CONTROLS
A10-genset-All-in-One-Tank-System- large steel generator fuel tank with
SYSTEM ACTIVE

Choose Your Storage Configuration

Sized to the tank in front of you.

Earthsafe automatic fuel transfer systems move fuel safely and efficiently between bulk storage tanks, day tanks, and generators using intelligent controls and proven industrial components.

A12

10,000 to 50,000 Gallons

The A12 system provides automated fuel top-off for generator systems using integrated bulk storage, optional fuel polishing, and intelligent transfer controls—maintaining fuel inventory and required runtime following generator testing and operation.

Power 230 or 480 VAC
Approvals UL Modular Building QRNZ
Controller PLC, BMS integration, SCADA
Communication / interface Remote monitoring
Get the A12 data sheet →

A10

1000 to 18,000 Gallons

Modular Fuel, DEF and Engine Oil storage in 10, 20, and 40-ft ISO container dimensions. Purpose-built, double-wall UL 142 tanks with optional UL 2085 fire ratings integrate pre-plumbed and pre-wired equipment compartments for rapid, set-in-place install.

Approvals UL142, optional UL2085
Controller PLC or Relay Logic, BMS integration
Construction Double wall welded steel construction, Exterior epoxy prime with polyurethane finish, Stainless steel DEF compartments
Get the A10 data sheet →

A11

Project specific

Added capacity of up to 15,000 gallons of integrated storage. Pre-engineered transfer, monitoring, and control systems distribute fuel to individual generators or multi-generator installations, with all equipment factory assembled and performance tested.

Approvals UL 142 or Ul 2085 Fire Rated - Tank UL 508A - Controls
Controller Automatic refill, PLC or relay logic
Get the A11 data sheet →

A15

1,000 to 18,000 Gallons

Clean oil, waste oil, and DEF storage and transfer for extended natural gas engine operation. Double-wall, insulated compartments with removable roof access and optional heating and DEF chilling for all-climate operation.

Approvals UL 142
Construction Double wall welded steel construction, Exterior epoxy prime with polyurethane finish, Stainless steel DEF compartments
Get the A15 data sheet →
Flow range
Family span · 0–300 GPM
Top Off Fueling
A12
Best for
Automatic fuel management, integrated control
All-In-One
A10
Best for
Automatic fuel transfer, rapid installation
Run Time Extension
A11
Best for
Long duration runtime, automatic refill
Natural Gas CHP
A15
Best for
Natural Gas Power
A12 Top Off Fueling
A10 All-In-One
A11 Run Time Extension
A15 Natural Gas CHP
0 75 150 225 300 GAL

Shared technology

Everything in one place.

01

Automatic operation

Maintains fuel supply without operator intervention.

02

Intelligent controls

Coordinates pumps, valves, and tank levels for reliable performance.

03

Complete system integration

Interfaces with generators, BMS, SCADA, and remote monitoring platforms.

04

Factory tested

Every system is assembled, programmed, and tested before shipment.

Built for streamlined installation

Arrive. Set. Connect.

01

Monitor tank levels

Continuously monitors bulk and day tank inventories.

02

Transfer fuel

Starts and stops transfer pumps automatically based on demand.

03

Verify safe operation

Monitors flow, alarms, and equipment status throughout each transfer cycle.

04

Maintain generator readiness

Keeps day tanks supplied so standby generators are always ready to operate.

Model comparison

The whole family, side by side.

Model Flow Capacity Power Approvals Controller Communication/Interface Construction Best for
A12
Receipt 300 GPM, Polishing 50 GPM, Transfer 50-100 GPM
10,000 to 50,000 Gallons
230 or 480 VAC
UL Modular Building QRNZ
PLC, BMS integration, SCADA
Remote monitoring
None
Automatic fuel management, integrated control
A10
Project specific
1000 to 18,000 Gallons
None
UL142, optional UL2085
PLC or Relay Logic, BMS integration
None
Double wall welded steel construction, Exterior epoxy prime with polyurethane finish, Stainless steel DEF compartments
Automatic fuel transfer, rapid installation
A11
None
Project specific
None
UL 142 or Ul 2085 Fire Rated - Tank UL 508A - Controls
Automatic refill, PLC or relay logic
None
None
Long duration runtime, automatic refill
A15
Custom
1,000 to 18,000 Gallons
None
UL 142
None
None
Double wall welded steel construction, Exterior epoxy prime with polyurethane finish, Stainless steel DEF compartments
Natural Gas Power

Automatic operation · PLC controls · Alarm management · Custom engineered

Equipment & options

Configured for your install.

Systems are customized for tank capacities, transfer rates, control philosophy, communications, and project requirements.

Standard equipment
Industrial transfer pumps
PLC or relay controls
Control valves
Instrumentation package
Alarm monitoring
Communications hardware
Factory testing
Options
Redundant pumps
Variable frequency drives
Remote monitoring
UL508A control panels
Custom piping arrangements
Expanded communications

Talk to an engineer

Need help selecting a fuel transfer system?

We'll help configure a factory-integrated Fuel, DEF, or Engine Oil storage system with the capacity, equipment, and controls required for your installation.